Return to site

How To Put An Iso File On A Flash Drive

broken image


This is due to FAT32 limitation. Files larger than 4GB can NOT be stored on a FAT32 volume. Formatting the flash drive as exFAT or NTFS will resolve this issue.
WARNING: Backup your data. Formatting will delete all the data in your device.
SOLUTION 1 - Format in exFAT
exFAT file system that allows a single file larger than 4GB to be stored on the device. This file system is also compatible with Mac.

Windows 7 and Mac OS 10.6.6 and higher are compatible with exFAT out of the box. Older operating systems may need a patch installed for exFAT compatibility.
NOTE: exFAT file system is NOT compatible with some host devices such as TV, game systems, older operating systems, car stereos etc.
Formatting a drive in exFAT
1. Double-click on My Computer.
2. Right-click on the flash drive or memory card, then select Format.
3. In the File System list, click exFAT.
4. Click Start.
5. Click OK to start formatting.
Click Here for Instructions to format with Mac

SOLUTION 2
- Format in NTFS
WARNING:
- Formatting the device as NTFS will make it unwriteable on a Mac computer. Most Mac computers can read NTFS, but not write.
- NTFS is a journaled file system, this creates more read/write activities. Therefore, it MAY decrease life expectancy of your device.
- Once the device is formatted as NTFS, you MUST use 'Safely Remove Hardware' to remove your device.
STEP 1 - Optimize the flash drive for performance
1. Plug in the device to the PC.
2. Open The Computer Management Console
a) Windows 8
b) Windows XP, Windows Vista, Windows 7

3. On the Left side selectDevice Manager
4.On the right side expandDisk Drives
5. Right-click on the flash drive, then select Properties.
6. Click the Policy tab.
7. Select Optimize for performance, then click OK.
STEP 2 - Format the flash drive
1. Double-click My Computer.
2. Right-click on the flash drive, then select Format.
3. In the File system list, click NTFS.
4. Click Start.
5. Click OK to start formatting.

When you want to install a new OS, you usually create a bootable USB flash drive with the .iso of that OS. To do that you can use GUI programs like Etcher or Rufus or the dd command. But what do you do if for any reason you want a multi-iso boot flash drive? Or you simply don't want to to wait for the drive to be formatted and flashed with a new .iso? You can use an open-source tool called Ventoy.

Put

You can also burn the ISO file to a CD or DVD or copy it to a USB drive and install it from the disc or drive. If you download Windows 10 as an ISO file, you will need to burn it to a bootable DVD. The biggest file is about 5GB and the file system of my USB is FAT32. Does anyone know how to copy large files over 4GB to a USB flash drive?' To figure out the reason why some large files transfer between the USB drive and computer failed, it's necessary to know the FAT32 file system as well as the FAT32 file size limit in Windows 10/8/7. It would be great if you put all the ISO files on a flash drive and make a multiboot USB using. Life is a lot easier when a single storage media houses many ISO files. The process to create. Accept the agreement, and when the main window opens, click the Linux Distribution drop-down menu labeled as 'Step 1' and select 'Ubuntu'. Now in 'Step 2', click browse, and select your Ubuntu ISO you. Make sure your USB flash drive gets enough space for storing ISO image file. Locate source ISO image file, right click it and then select 'Send to' option to send it to removable disk. Or directly copy source ISO image file and then paste it to USB flash drive.

ALSO READUSBImager: A Very Minimal Cross Platform App to Create Bootable Flash Drives

Ventoy is an open source tool to create bootable USB drive for OS images. With Ventoy, you don't need to format the disk every time you want to flash a new OS iso on the disk. You just need to copy the iso file to the USB drive and boot from it.

You can copy all the .iso files at a time and ventoy will give you a boot menu to select them. Both Legacy BIOS and UEFI are supported and it works with 200+ ISO files.

How do i unzip a rar file. HOW TO USE VENTOY

1. Download Ventoy. There's a Linux file and a Windows file.

NOTE: On Windows you'll have a GUI. It's self explanatory, just choose your USB flash drive and click install. This tutorial shows you how to create the multi-iso boot flash drive on Linux ( Pop!_OS 20.04 ). If you're on macOS, you're out of luck as the dev ( apparently ) has no plans on releasing the tool for macOS. However, you can install any Linux distro or Windows in VirtualBox and use the tool.

2. Decompress the file you've just downloaded.

3. Open a terminal window and cd into the Ventoy folder. In my case ~/Desktop/ventoy-1.0.09

4. Just in case the shell script isn't executable run chmod +x Ventoy2Disk.sh, and then run lsblk to list your block devices. MAKE SURE you choose your USB flash drive ( in my case /dev/sdb ).

5. Now install Ventoy on your flash drive with sudo ./Ventoy2Disk.sh -i /dev/sdb

How To Put An Iso File On A Flash Drive Freeware

5.1. Other options:
-i install ventoy to sdX ( fails if ventoy is already installed on the disk )
-I force install ventoy to sdX ( does not matter if ventoy is installed or not on the disk )
-u update ventoy in sdX

6. It will tell you that you're about to install Ventoy on your disk and all the data on your disk will be lost. Agree ( twice ), and Ventoy will be installed on your flash drive.

7. That's it. Now, all you have to do is copy all the .iso files onto your flash drive. You can place them in directories and subdirectories too. Ventoy will search all the directories and subdirectories recursively to find all the iso files and list them in the boot menu alphabetically. However, the full path of the iso file (directories,subdirectories and file name) could NOT contain space or non-ascii characters.

How To Transfer Files To Flash Drive

How To Put An Iso File On A Flash Drive

You can also burn the ISO file to a CD or DVD or copy it to a USB drive and install it from the disc or drive. If you download Windows 10 as an ISO file, you will need to burn it to a bootable DVD. The biggest file is about 5GB and the file system of my USB is FAT32. Does anyone know how to copy large files over 4GB to a USB flash drive?' To figure out the reason why some large files transfer between the USB drive and computer failed, it's necessary to know the FAT32 file system as well as the FAT32 file size limit in Windows 10/8/7. It would be great if you put all the ISO files on a flash drive and make a multiboot USB using. Life is a lot easier when a single storage media houses many ISO files. The process to create. Accept the agreement, and when the main window opens, click the Linux Distribution drop-down menu labeled as 'Step 1' and select 'Ubuntu'. Now in 'Step 2', click browse, and select your Ubuntu ISO you. Make sure your USB flash drive gets enough space for storing ISO image file. Locate source ISO image file, right click it and then select 'Send to' option to send it to removable disk. Or directly copy source ISO image file and then paste it to USB flash drive.

ALSO READUSBImager: A Very Minimal Cross Platform App to Create Bootable Flash Drives

Ventoy is an open source tool to create bootable USB drive for OS images. With Ventoy, you don't need to format the disk every time you want to flash a new OS iso on the disk. You just need to copy the iso file to the USB drive and boot from it.

You can copy all the .iso files at a time and ventoy will give you a boot menu to select them. Both Legacy BIOS and UEFI are supported and it works with 200+ ISO files.

How do i unzip a rar file. HOW TO USE VENTOY

1. Download Ventoy. There's a Linux file and a Windows file.

NOTE: On Windows you'll have a GUI. It's self explanatory, just choose your USB flash drive and click install. This tutorial shows you how to create the multi-iso boot flash drive on Linux ( Pop!_OS 20.04 ). If you're on macOS, you're out of luck as the dev ( apparently ) has no plans on releasing the tool for macOS. However, you can install any Linux distro or Windows in VirtualBox and use the tool.

2. Decompress the file you've just downloaded.

3. Open a terminal window and cd into the Ventoy folder. In my case ~/Desktop/ventoy-1.0.09

4. Just in case the shell script isn't executable run chmod +x Ventoy2Disk.sh, and then run lsblk to list your block devices. MAKE SURE you choose your USB flash drive ( in my case /dev/sdb ).

5. Now install Ventoy on your flash drive with sudo ./Ventoy2Disk.sh -i /dev/sdb

How To Put An Iso File On A Flash Drive Freeware

5.1. Other options:
-i install ventoy to sdX ( fails if ventoy is already installed on the disk )
-I force install ventoy to sdX ( does not matter if ventoy is installed or not on the disk )
-u update ventoy in sdX

6. It will tell you that you're about to install Ventoy on your disk and all the data on your disk will be lost. Agree ( twice ), and Ventoy will be installed on your flash drive.

7. That's it. Now, all you have to do is copy all the .iso files onto your flash drive. You can place them in directories and subdirectories too. Ventoy will search all the directories and subdirectories recursively to find all the iso files and list them in the boot menu alphabetically. However, the full path of the iso file (directories,subdirectories and file name) could NOT contain space or non-ascii characters.

How To Transfer Files To Flash Drive

How to save imovie project file. 8. When bootoing from the multi-iso boot flash drive you've just created you'll see a screen like the one in the screnshot below

How To Put An Iso File On A Flash Drive

For troubleshooting visit the official project page on Github.





broken image